Full Ideaworks Calendar

Upcoming events

Art Hop at Ideaworks

Start
02 Jan 2025

End
03 Dec 2026

Schedule
24 sessions

Location
Fresno Ideaworks

Show details
Intro Woodshop (beginners, refresher & safety)

Start
12 Jul 2026

End
26 Jul 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
0

Registration is closed

Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience. The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.

Students should plan to attend all three classes.

The first meeting will cover basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1. We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Materials for class projects

Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Welding (beginners, refresher & safety)

Start
15 Jul 2026

End
29 Jul 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H street, Fresno, CA. 93721

Spaces left
3

Register

Beginning Welding is a 3-session course; each session is 3 hours. Students will gain a core understanding of how to operate welding equipment safely and get familiar with basic techniques. This class is for hobbyists, makers, artists, or anyone wanting to try something new and challenge themselves a bit in a comfortable collaborative environment.

Check the class times shown to ensure you can make it to every session.

What Not to Wear:

Do not wear rings or other jewelry.

No open toe shoes (anywhere in the facility)

Do not wear clothing made from synthetic or synthetic blends. The synthetic fabric can burn vigorously, melt and produce skin burns.

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around welding equipment.

We will provide:

Eye protection

Face hood/shield

Leathers

Insulated gloves

Ear plugs

Materials for class projects

Please bring any hoods/gloves/leathers if you have them

Upon completion of the class, Ideaworks members may be certified to use the Weldatorium tools unsupervised during business hours.

Free Month of Membership For First-time students

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Wood Lathe - Bowl Turning

When
22 Jul 2026

5:30 PM - 9:30 PM

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
1

Register

If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.
What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards must be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection and face protection

Ear plugs if requested

Materials for class projects

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Beginning/Refresher Laser Cutting for Ideaworks Members

Start
22 Jul 2026

End
23 Jul 2026

Schedule
2 sessions

Location
Fresno Ideaworks Modern Fabrications Lab

Spaces left
4

Register

In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter. The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.

Registration is limited to Ideaworks Members

Participants must have the ability to pay attention and focus for the entire length of the class session.

Experience with computer operation and drawing programs recommended.

Laptops will be provided, but you are encouraged to bring your own.

Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

Join us

Show details
Beginning/Refresher Laser Cutting for Ideaworks Members

Start
10 Aug 2026

End
11 Aug 2026

Schedule
2 sessions

Location
Fresno Ideaworks Modern Fabrications Lab

Spaces left
3

Register

In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter. The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.

Registration is limited to Ideaworks Members

Participants must have the ability to pay attention and focus for the entire length of the class session.

Experience with computer operation and drawing programs recommended.

Laptops will be provided, but you are encouraged to bring your own.

Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

Join us

Show details
Welding (beginners, refresher & safety)

Start
12 Aug 2026

End
26 Aug 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H street, Fresno, CA. 93721

Spaces left
4

Register

Beginning Welding is a 3-session course; each session is 3 hours. Students will gain a core understanding of how to operate welding equipment safely and get familiar with basic techniques. This class is for hobbyists, makers, artists, or anyone wanting to try something new and challenge themselves a bit in a comfortable collaborative environment.

Check the class times shown to ensure you can make it to every session.

What Not to Wear:

Do not wear rings or other jewelry.

No open toe shoes (anywhere in the facility)

Do not wear clothing made from synthetic or synthetic blends. The synthetic fabric can burn vigorously, melt and produce skin burns.

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around welding equipment.

We will provide:

Eye protection

Face hood/shield

Leathers

Insulated gloves

Ear plugs

Materials for class projects

Please bring any hoods/gloves/leathers if you have them

Upon completion of the class, Ideaworks members may be certified to use the Weldatorium tools unsupervised during business hours.

Free Month of Membership For First-time students

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Introductory Wheel throwing Ceramics

Start
13 Aug 2026

End
03 Sep 2026

Schedule
4 sessions

Location
Ideaworks - 1730 H street, Fresno, CA. 93721

Spaces left
0

Join waitlist

This introductory class focuses on wheel throwing and basic glazing. It is perfect for a group of friends, family, couples or even by yourself (you will make friends in this class, we promise). In this class, you will be learning the basics of forming a ball of clay into a beautiful vase, cup, mug, bowl, or plate using an electric potter's wheel. If you’re feeling especially inspired to take on more… how about a bird feeder or planter!?! The possibilities are endless with pottery.

All materials will be provided. Additionally, the items you create go home with you to share with your friends and family. All items made are food, dishwasher, and microwave safe.

What Not to Wear:

Do wear comfortable clothing that is easily laundered.

Please trim fingernails short. Long nails make manipulating clay on the potter's wheel very difficult. Similarly, rings, bracelets, and wristwatches will damage your creations.

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards must be securely tied back.

Currently face masks are recommended but not required in the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide all materials for class projects.

Upon completion of the class, Ideaworks members may be certified to use the covered ceramics studio tools unsupervised during business hours.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

Show details
Intro Woodshop (beginners, refresher & safety)

Start
16 Aug 2026

End
30 Aug 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
2

Register

Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience. The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.

Students should plan to attend all three classes.

The first meeting will cover basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1. We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Materials for class projects

Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Beginning CNC Routing/Engraving (4'X8' bed)

Start
17 Aug 2026

End
20 Aug 2026

Schedule
2 sessions

Location
Fresno Ideaworks - 1730 H Street Fresno, CA 93721

Spaces left
3

Register

This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration. This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job. This introductory class does not include any Computer Aided Design (CAD) instruction.

This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

Upon completion of this introductory class, students will have earned their Programming Level 1. Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision. This level includes programming and operation. Unsupervised access will be determined by instructor approval only.

Prerequisites:

Basic understanding of Windows File Structure

Basic arithmetic (addition, subtraction, multiplication, division)

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Stained Glass Workshop: Little Bird (all levels)

When
21 Aug 2026

5:30 PM - 8:30 PM

Location
Fresno Ideaworks

Spaces left
0

Registration is closed

In this class you will learn the basic skills and practice using the tools needed to create a small stained glass treasure to hang at home or gift to a friend.

The workshop will cover choosing appropriate colors and textures, cutting the glass, foiling the pieces, soldering the work together, and adding the finishing touches. Each student will leave the class with a complete understanding of how to make a stained glass artwork and will take home a unique, small, hangable item.

All materials and safety gear provided.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery.

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

gloves

Upon completion of the class and projects, Ideaworks members may be certified to use the stained glass station during business hours with instructor's approval.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Stained Glass Workshop: Little Bird (all levels)

When
22 Aug 2026

10:00 AM - 1:00 PM

Location
Fresno Ideaworks

Spaces left
0

Registration is closed

In this class you will learn the basic skills and practice using the tools needed to create a small stained glass treasure to hang at home or gift to a friend.

The workshop will cover choosing appropriate colors and textures, cutting the glass, foiling the pieces, soldering the work together, and adding the finishing touches. Each student will leave the class with a complete understanding of how to make a stained glass artwork and will take home a unique, small, hangable item.

All materials and safety gear provided.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery.

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

gloves

Upon completion of the class and projects, Ideaworks members may be certified to use the stained glass station during business hours with instructor's approval.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Drawing Club

When
22 Aug 2026

5:00 PM - 7:00 PM

Location
Fresno Ideaworks

Register

Live Model Drawing Club is new at Fresno Ideaworks!

One of our 2026 resolutions has been to bring you more social opportunities to expand your fine arts practice. So whether you're a beginner or accomplished, and whatever your style or perspective, we're looking forward to spending time with you!

BYO pens, pencils, charcoal, and preferred paper, but we will have some to share. $10 at the door will be shared with the model. Feel free to offer more or to donate to Fresno Ideaworks.

Show details
Wood Lathe - Bowl Turning

When
26 Aug 2026

5:30 PM - 9:30 PM

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
2

Register

If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.
What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards must be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection and face protection

Ear plugs if requested

Materials for class projects

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Intro Woodshop (beginners, refresher & safety)

Start
06 Sep 2026

End
20 Sep 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
5

Register

Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience. The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.

Students should plan to attend all three classes.

The first meeting will cover basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1. We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Materials for class projects

Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Beginning/Refresher Laser Cutting for Ideaworks Members

Start
09 Sep 2026

End
10 Sep 2026

Schedule
2 sessions

Location
Fresno Ideaworks Modern Fabrications Lab

Spaces left
3

Register

In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter. The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.

Registration is limited to Ideaworks Members

Participants must have the ability to pay attention and focus for the entire length of the class session.

Experience with computer operation and drawing programs recommended.

Laptops will be provided, but you are encouraged to bring your own.

Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

Join us

Show details
Welding (beginners, refresher & safety)

Start
09 Sep 2026

End
23 Sep 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H street, Fresno, CA. 93721

Spaces left
4

Register

Beginning Welding is a 3-session course; each session is 3 hours. Students will gain a core understanding of how to operate welding equipment safely and get familiar with basic techniques. This class is for hobbyists, makers, artists, or anyone wanting to try something new and challenge themselves a bit in a comfortable collaborative environment.

Check the class times shown to ensure you can make it to every session.

What Not to Wear:

Do not wear rings or other jewelry.

No open toe shoes (anywhere in the facility)

Do not wear clothing made from synthetic or synthetic blends. The synthetic fabric can burn vigorously, melt and produce skin burns.

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around welding equipment.

We will provide:

Eye protection

Face hood/shield

Leathers

Insulated gloves

Ear plugs

Materials for class projects

Please bring any hoods/gloves/leathers if you have them

Upon completion of the class, Ideaworks members may be certified to use the Weldatorium tools unsupervised during business hours.

Free Month of Membership For First-time students

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Stained Glass Workshop: Pumpkin (all levels)

When
11 Sep 2026

5:30 PM - 8:30 PM

Location
Fresno Ideaworks

Spaces left
5

Register

In this class you will learn the basic skills and practice using the tools needed to create a small stained glass treasure to hang at home or gift to a friend.

The workshop will cover choosing appropriate colors and textures, cutting the glass, foiling the pieces, soldering the work together, and adding the finishing touches. Each student will leave the class with a complete understanding of how to make a stained glass artwork and will take home a unique, small, hangable item.

All materials and safety gear provided.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery.

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

gloves

Upon completion of the class and projects, Ideaworks members may be certified to use the stained glass station during business hours with instructor's approval.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Stained Glass Workshop: Pumpkin (all levels)

When
12 Sep 2026

10:00 AM - 1:00 PM

Location
Fresno Ideaworks

Spaces left
5

Register

In this class you will learn the basic skills and practice using the tools needed to create a small stained glass treasure to hang at home or gift to a friend.

The workshop will cover choosing appropriate colors and textures, cutting the glass, foiling the pieces, soldering the work together, and adding the finishing touches. Each student will leave the class with a complete understanding of how to make a stained glass artwork and will take home a unique, small, hangable item.

All materials and safety gear provided.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery.

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

gloves

Upon completion of the class and projects, Ideaworks members may be certified to use the stained glass station during business hours with instructor's approval.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Drawing Club

When
12 Sep 2026

5:00 PM - 7:00 PM

Location
Fresno Ideaworks

Register

Live Model Drawing Club is new at Fresno Ideaworks!

One of our 2026 resolutions has been to bring you more social opportunities to expand your fine arts practice. So whether you're a beginner or accomplished, and whatever your style or perspective, we're looking forward to spending time with you!

BYO pens, pencils, charcoal, and preferred paper, but we will have some to share. $10 at the door will be shared with the model. Feel free to offer more or to donate to Fresno Ideaworks.

Show details
Beginning CNC Routing/Engraving (4'X8' bed)

Start
14 Sep 2026

End
17 Sep 2026

Schedule
2 sessions

Location
Fresno Ideaworks - 1730 H Street Fresno, CA 93721

Spaces left
4

Register

This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration. This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job. This introductory class does not include any Computer Aided Design (CAD) instruction.

This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

Upon completion of this introductory class, students will have earned their Programming Level 1. Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision. This level includes programming and operation. Unsupervised access will be determined by instructor approval only.

Prerequisites:

Basic understanding of Windows File Structure

Basic arithmetic (addition, subtraction, multiplication, division)

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Wood Lathe - Bowl Turning

When
23 Sep 2026

5:30 PM - 9:30 PM

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
3

Register

If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.
What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards must be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection and face protection

Ear plugs if requested

Materials for class projects

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Stained Glass Workshop: Ghosts! (all levels)

When
02 Oct 2026

5:30 PM - 8:30 PM

Location
Fresno Ideaworks

Spaces left
5

Register

In this class you will learn the basic skills and practice using the tools needed to create a small stained glass treasure to hang at home or gift to a friend.

The workshop will cover choosing appropriate colors and textures, cutting the glass, foiling the pieces, soldering the work together, and adding the finishing touches. Each student will leave the class with a complete understanding of how to make a stained glass artwork and will take home a unique, small, hangable item.

All materials and safety gear provided.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery.

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

gloves

Upon completion of the class and projects, Ideaworks members may be certified to use the stained glass station during business hours with instructor's approval.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Stained Glass Workshop: Ghosts! (all levels)

When
03 Oct 2026

10:00 AM - 1:00 PM

Location
Fresno Ideaworks

Spaces left
5

Register

In this class you will learn the basic skills and practice using the tools needed to create a small stained glass treasure to hang at home or gift to a friend.

The workshop will cover choosing appropriate colors and textures, cutting the glass, foiling the pieces, soldering the work together, and adding the finishing touches. Each student will leave the class with a complete understanding of how to make a stained glass artwork and will take home a unique, small, hangable item.

All materials and safety gear provided.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery.

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

gloves

Upon completion of the class and projects, Ideaworks members may be certified to use the stained glass station during business hours with instructor's approval.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Drawing Club

When
03 Oct 2026

5:00 PM - 7:00 PM

Location
Fresno Ideaworks

Register

Live Model Drawing Club is new at Fresno Ideaworks!

One of our 2026 resolutions has been to bring you more social opportunities to expand your fine arts practice. So whether you're a beginner or accomplished, and whatever your style or perspective, we're looking forward to spending time with you!

BYO pens, pencils, charcoal, and preferred paper, but we will have some to share. $10 at the door will be shared with the model. Feel free to offer more or to donate to Fresno Ideaworks.

Show details
Intro Woodshop (beginners, refresher & safety)

Start
04 Oct 2026

End
25 Oct 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
5

Register

Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience. The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.

Students should plan to attend all three classes.

The first meeting will cover basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1. We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Materials for class projects

Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Beginning/Refresher Laser Cutting for Ideaworks Members

Start
05 Oct 2026

End
06 Oct 2026

Schedule
2 sessions

Location
Fresno Ideaworks Modern Fabrications Lab

Spaces left
4

Register

In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter. The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.

Registration is limited to Ideaworks Members

Participants must have the ability to pay attention and focus for the entire length of the class session.

Experience with computer operation and drawing programs recommended.

Laptops will be provided, but you are encouraged to bring your own.

Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

Join us

Show details
Welding (beginners, refresher & safety)

Start
07 Oct 2026

End
21 Oct 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H street, Fresno, CA. 93721

Spaces left
4

Register

Beginning Welding is a 3-session course; each session is 3 hours. Students will gain a core understanding of how to operate welding equipment safely and get familiar with basic techniques. This class is for hobbyists, makers, artists, or anyone wanting to try something new and challenge themselves a bit in a comfortable collaborative environment.

Check the class times shown to ensure you can make it to every session.

What Not to Wear:

Do not wear rings or other jewelry.

No open toe shoes (anywhere in the facility)

Do not wear clothing made from synthetic or synthetic blends. The synthetic fabric can burn vigorously, melt and produce skin burns.

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around welding equipment.

We will provide:

Eye protection

Face hood/shield

Leathers

Insulated gloves

Ear plugs

Materials for class projects

Please bring any hoods/gloves/leathers if you have them

Upon completion of the class, Ideaworks members may be certified to use the Weldatorium tools unsupervised during business hours.

Free Month of Membership For First-time students

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Beginning CNC Routing/Engraving (4'X8' bed)

Start
12 Oct 2026

End
15 Oct 2026

Schedule
2 sessions

Location
Fresno Ideaworks - 1730 H Street Fresno, CA 93721

Spaces left
4

Register

This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration. This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job. This introductory class does not include any Computer Aided Design (CAD) instruction.

This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

Upon completion of this introductory class, students will have earned their Programming Level 1. Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision. This level includes programming and operation. Unsupervised access will be determined by instructor approval only.

Prerequisites:

Basic understanding of Windows File Structure

Basic arithmetic (addition, subtraction, multiplication, division)

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Wood Lathe - Bowl Turning

When
21 Oct 2026

5:30 PM - 9:30 PM

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
5

Register

If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.
What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards must be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection and face protection

Ear plugs if requested

Materials for class projects

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Welding (beginners, refresher & safety)

Start
04 Nov 2026

End
18 Nov 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H street, Fresno, CA. 93721

Spaces left
4

Register

Beginning Welding is a 3-session course; each session is 3 hours. Students will gain a core understanding of how to operate welding equipment safely and get familiar with basic techniques. This class is for hobbyists, makers, artists, or anyone wanting to try something new and challenge themselves a bit in a comfortable collaborative environment.

Check the class times shown to ensure you can make it to every session.

What Not to Wear:

Do not wear rings or other jewelry.

No open toe shoes (anywhere in the facility)

Do not wear clothing made from synthetic or synthetic blends. The synthetic fabric can burn vigorously, melt and produce skin burns.

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around welding equipment.

We will provide:

Eye protection

Face hood/shield

Leathers

Insulated gloves

Ear plugs

Materials for class projects

Please bring any hoods/gloves/leathers if you have them

Upon completion of the class, Ideaworks members may be certified to use the Weldatorium tools unsupervised during business hours.

Free Month of Membership For First-time students

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Intro Woodshop (beginners, refresher & safety)

Start
08 Nov 2026

End
22 Nov 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
6

Register

Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience. The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.

Students should plan to attend all three classes.

The first meeting will cover basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1. We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Materials for class projects

Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Wood Lathe - Bowl Turning

When
12 Nov 2026

5:30 PM - 9:30 PM

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
5

Register

If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.
What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards must be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection and face protection

Ear plugs if requested

Materials for class projects

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Beginning CNC Routing/Engraving (4'X8' bed)

Start
16 Nov 2026

End
19 Nov 2026

Schedule
2 sessions

Location
Fresno Ideaworks - 1730 H Street Fresno, CA 93721

Spaces left
4

Register

This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration. This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job. This introductory class does not include any Computer Aided Design (CAD) instruction.

This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

Upon completion of this introductory class, students will have earned their Programming Level 1. Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision. This level includes programming and operation. Unsupervised access will be determined by instructor approval only.

Prerequisites:

Basic understanding of Windows File Structure

Basic arithmetic (addition, subtraction, multiplication, division)

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Beginning/Refresher Laser Cutting for Ideaworks Members

Start
23 Nov 2026

End
24 Nov 2026

Schedule
2 sessions

Location
Fresno Ideaworks Modern Fabrications Lab

Spaces left
4

Register

In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter. The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.

Registration is limited to Ideaworks Members

Participants must have the ability to pay attention and focus for the entire length of the class session.

Experience with computer operation and drawing programs recommended.

Laptops will be provided, but you are encouraged to bring your own.

Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

Join us

Show details
Welding (beginners, refresher & safety)

Start
02 Dec 2026

End
16 Dec 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H street, Fresno, CA. 93721

Spaces left
4

Register

Beginning Welding is a 3-session course; each session is 3 hours. Students will gain a core understanding of how to operate welding equipment safely and get familiar with basic techniques. This class is for hobbyists, makers, artists, or anyone wanting to try something new and challenge themselves a bit in a comfortable collaborative environment.

Check the class times shown to ensure you can make it to every session.

What Not to Wear:

Do not wear rings or other jewelry.

No open toe shoes (anywhere in the facility)

Do not wear clothing made from synthetic or synthetic blends. The synthetic fabric can burn vigorously, melt and produce skin burns.

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around welding equipment.

We will provide:

Eye protection

Face hood/shield

Leathers

Insulated gloves

Ear plugs

Materials for class projects

Please bring any hoods/gloves/leathers if you have them

Upon completion of the class, Ideaworks members may be certified to use the Weldatorium tools unsupervised during business hours.

Free Month of Membership For First-time students

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Intro Woodshop (beginners, refresher & safety)

Start
06 Dec 2026

End
20 Dec 2026

Schedule
3 sessions

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
6

Register

Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience. The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.

Students should plan to attend all three classes.

The first meeting will cover basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1. We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Materials for class projects

Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Beginning/Refresher Laser Cutting for Ideaworks Members

Start
07 Dec 2026

End
08 Dec 2026

Schedule
2 sessions

Location
Fresno Ideaworks Modern Fabrications Lab

Spaces left
4

Register

In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter. The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.

Registration is limited to Ideaworks Members

Participants must have the ability to pay attention and focus for the entire length of the class session.

Experience with computer operation and drawing programs recommended.

Laptops will be provided, but you are encouraged to bring your own.

Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

Join us

Show details
Wood Lathe - Bowl Turning

When
09 Dec 2026

5:30 PM - 9:30 PM

Location
Ideaworks - 1730 H Street, Fresno, CA. 93721

Spaces left
5

Register

If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.
What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards must be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection and face protection

Ear plugs if requested

Materials for class projects

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details
Beginning CNC Routing/Engraving (4'X8' bed)

Start
14 Dec 2026

End
17 Dec 2026

Schedule
2 sessions

Location
Fresno Ideaworks - 1730 H Street Fresno, CA 93721

Spaces left
4

Register

This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration. This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job. This introductory class does not include any Computer Aided Design (CAD) instruction.

This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

Upon completion of this introductory class, students will have earned their Programming Level 1. Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision. This level includes programming and operation. Unsupervised access will be determined by instructor approval only.

Prerequisites:

Basic understanding of Windows File Structure

Basic arithmetic (addition, subtraction, multiplication, division)

What Not to Wear:

Do not wear any dangling jewelry or lanyards that can get caught in machinery.

Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery

No open toe shoes (anywhere in the facility)

Long hair and beards should be securely tied back.

Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.

We will provide:

Eye protection

Ear plugs if requested

Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

FREE MONTH OF MEMBERSHIP - New members only

This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:

Join us

Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

CANCELLATION, CHANGE, AND REFUND POLICY

This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

Show details

Past events

11 Jul 2026	Drawing Club
11 Jul 2026	Stained Glass Workshop: Sea Turtles (all levels)
10 Jul 2026	Stained Glass Workshop: Sea Turtles (all levels)
22 Jun 2026	Beginning CNC Routing/Engraving (4'X8' bed)
20 Jun 2026	Drawing Club
20 Jun 2026	Stained Glass Workshop: June Bugs (all levels)
19 Jun 2026	Stained Glass Workshop: June Bugs (all levels)
14 Jun 2026	Intro Woodshop (beginners, refresher & safety)
03 Jun 2026	Introductory Wheel throwing Ceramics
25 May 2026	Beginning CNC Routing/Engraving (4'X8' bed) DATE MOVED!
17 May 2026	Intro Woodshop (beginners, refresher & safety)
16 May 2026	Lampwork Glass Art: Beads (all levels)
16 May 2026	Stained Glass Workshop: Tulips (all levels)
15 May 2026	Stained Glass Workshop: Tulips (all levels)
01 May 2026	Woodshop Skills: End Grain Cutting Board
28 Apr 2026	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
25 Apr 2026	Lampwork Glass Art: Pendants (all levels)
24 Apr 2026	Intro Woodshop Bootcamp: Serving Board (weekend intensive for beginners, refresher & safety)
20 Apr 2026	Stained Glass Workshop: Butterflies (all levels)
20 Apr 2026	Beginning CNC Routing/Engraving (4'X8' bed)
15 Apr 2026	Wood Lathe - Bowl Turning
13 Apr 2026	Advanced Welding Techniques and Applications
12 Apr 2026	Intro Woodshop (beginners, refresher & safety)
11 Apr 2026	Lampwork Glass Art: Dichroic Galaxy Marbles (Intermediate Level)
08 Apr 2026	Welding (beginners, refresher & safety)
28 Mar 2026	Lampwork Glass Art: Bird Eggs (all levels)
28 Mar 2026	Stained Glass Workshop: Butterflies (all levels)
27 Mar 2026	Stained Glass Workshop: Butterflies (all levels)
25 Mar 2026	CNC Carving/Routing Using Inventables X-Carve
16 Mar 2026	Beginning CNC Routing/Engraving (4'X8' bed)
14 Mar 2026	Pi Day 2026
11 Mar 2026	Wood Lathe - Bowl Turning
08 Mar 2026	Intro Woodshop (beginners, refresher & safety)
04 Mar 2026	Welding (beginners, refresher & safety)
28 Feb 2026	Lampwork Glass Art: Marbles! (all levels)
23 Feb 2026	Beginning/Refresher Laser Cutting for Ideaworks Members
18 Feb 2026	Machine Shop: Beginning/Refresher/Safety
16 Feb 2026	Beginning CNC Routing/Engraving (4'X8' bed)
14 Feb 2026	Members Meeting
14 Feb 2026	Stained Glass Workshop: Sweet Hearts (all levels)
13 Feb 2026	Stained Glass Workshop: Sweet Hearts (all levels)
11 Feb 2026	Wood Lathe - Bowl Turning
09 Feb 2026	Board of Directors meeting
08 Feb 2026	Intro Woodshop (beginners, refresher & safety)
07 Feb 2026	Lampwork Glass Art: Heart Pendants (all levels)
04 Feb 2026	Welding (beginners, refresher & safety)
31 Jan 2026	Introduction to Microcontrollers: Circuits & Programming
21 Jan 2026	Beginning Wood Lathe - Pen Turning
19 Jan 2026	Beginning CNC Routing/Engraving (4'X8' bed)
17 Jan 2026	Drawing Club
17 Jan 2026	Lampwork Glass Art: Beads (all levels)
17 Jan 2026	Stained Glass Workshop: Snow Drop Blossoms (all levels)
16 Jan 2026	Stained Glass Workshop: Snow Drop Blossoms (all levels)
14 Jan 2026	Wood Lathe - Bowl Turning
13 Jan 2026	Access to Technology: Digital Literacy for Seniors / Alfabetización Digital para Mayores
11 Jan 2026	Intro Woodshop (beginners, refresher & safety)
10 Jan 2026	Stained Glass Workshop: Private Session (Candlelight Guild)
10 Jan 2026	Beginning Wood Lathe - Pen Turning
07 Jan 2026	Welding (beginners, refresher & safety)
07 Jan 2026	PRIVATE Closed class Wednesday 1-3pm stools
17 Dec 2025	Beginning Wood Lathe - Pen Turning
15 Dec 2025	Beginning CNC Routing/Engraving (4'X8' bed)
13 Dec 2025	Lampwork Glass Art: Christmas Ornaments (all levels)
13 Dec 2025	December Member Meeting: Meet Your Makers!
13 Dec 2025	Stained Glass Workshop: Winter Star (all levels)
12 Dec 2025	Stained Glass Workshop: Winter Star (all levels)
11 Dec 2025	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
10 Dec 2025	Wood Lathe - Bowl Turning
07 Dec 2025	Intro Woodshop (beginners, refresher & safety)
06 Dec 2025	Beginning Wood Lathe - Pen Turning
03 Dec 2025	Welding (beginners, refresher & safety)
25 Nov 2025	Wood Lathe - Bowl Turning
20 Nov 2025	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
17 Nov 2025	Beginning CNC Routing/Engraving (4'X8' bed)
15 Nov 2025	Lampwork Glass Art: Pendants (all levels)
15 Nov 2025	Stained Glass Workshop: Shining Moon (all levels)
14 Nov 2025	Stained Glass Workshop: Shining Moon (all levels)
12 Nov 2025	November Member Meeting: Meet Your Makers!
05 Nov 2025	Welding (beginners, refresher & safety)
02 Nov 2025	Intro Woodshop (beginners, refresher & safety)
25 Oct 2025	Lampwork Glass Art: Marbles! (all levels)
11 Oct 2025	Member Meeting
05 Oct 2025	Intro Woodshop (beginners, refresher & safety)
04 Oct 2025	Stained Glass Workshop: Spiderweb (all levels)
04 Oct 2025	Quilt Block Club: Holiday Gifts
03 Oct 2025	Stained Glass Workshop: Spiderweb (all levels)
01 Oct 2025	Welding (beginners, refresher & safety)
27 Sep 2025	Stained Glass Workshop: Dragon mobile (all levels)
26 Sep 2025	Stained Glass Workshop: Dragon mobile (all levels)
20 Sep 2025	Lampwork Glass Art: Beads (all levels)
19 Sep 2025	Intro Woodshop Bootcamp: Serving Board (weekend intensive for beginners, refresher & safety)
17 Sep 2025	Beginning/Refresher Laser Cutting for Ideaworks Members
17 Sep 2025	Wood Lathe - Bowl Turning
15 Sep 2025	Beginning CNC Routing/Engraving (4'X8' bed)
10 Sep 2025	Members meeting - Meet the Makers
08 Sep 2025	Board of Directors Meeting
07 Sep 2025	Intro Woodshop (beginners, refresher & safety)
03 Sep 2025	Welding (beginners, refresher & safety)
18 Aug 2025	Beginning/Refresher Laser Cutting for Ideaworks Members
16 Aug 2025	Stained Glass Workshop: Jellyfish! (all levels)
15 Aug 2025	Stained Glass Workshop: Jellyfish! (all levels)
13 Aug 2025	PRIVATE Closed class Wednesday 1-3pm - stained glass birds
11 Aug 2025	Board of Directors Meeting
11 Aug 2025	Beginning CNC Routing/Engraving (4'X8' bed)
06 Aug 2025	Welding (beginners, refresher & safety)
03 Aug 2025	Intro Woodshop (beginners, refresher & safety)
29 Jul 2025	PRIVATE Closed class Wednesday 1-3pm - glaze and drawing
26 Jul 2025	Stained Glass Workshop: Summer Fruit (all levels)
25 Jul 2025	Stained Glass Workshop: Summer Fruit (all levels)
09 Jul 2025	Welding (beginners, refresher & safety)
07 Jul 2025	Beginning CNC Routing/Engraving (4'X8' bed)
27 Jun 2025	Intro Woodshop Bootcamp: Serving Board (weekend intensive for beginners, refresher & safety)
25 Jun 2025	TIME CHANGE - PRIVATE Closed class Wednesday 1-3pm - Ceramics
21 Jun 2025	Woodshop Skills: Make and Take-Cutting Board
14 Jun 2025	Stained Glass Workshop: Lily of the Valley (all levels)
13 Jun 2025	Stained Glass Workshop: Lily of the Valley (all levels)
08 Jun 2025	Intro Woodshop (beginners, refresher & safety)
06 Jun 2025	Intro Woodshop Bootcamp: Serving Board (weekend intensive for beginners, refresher & safety)
04 Jun 2025	Welding (beginners, refresher & safety) Dec
28 May 2025	PRIVATE Closed class Wednesday 10a-12p Lathe/Pen Turning
24 May 2025	Lampwork Glass Art: Beads (all levels)
17 May 2025	Stained Glass Workshop: Sailboats! (all levels)
16 May 2025	Stained Glass Workshop: Sailboats! (all levels)
14 May 2025	Welding (beginners, refresher & safety)
14 May 2025	Beginning Lathe - Pen Turning
14 May 2025	PRIVATE Closed class Wednesday 10a-12p Ceramics
04 May 2025	Intro Woodshop (beginners, refresher & safety)
03 May 2025	Print Day in May - at Ideaworks
25 Apr 2025	Intro Woodshop "Bootcamp" (weekend intensive for beginners, refresher & safety)
23 Apr 2025	PRIVATE Closed class Wednesday 10a-12p Ceramics
19 Apr 2025	Beginning Lathe - Pen Turning
16 Apr 2025	Machine Shop: Beginning/Refresher/Safety
16 Apr 2025	PRIVATE Closed class Wednesday 10a-12p Ceramics
12 Apr 2025	Lampwork Glass Art: Bird Eggs (all levels)
12 Apr 2025	Member Meeting
12 Apr 2025	Ideaworks Member Event: Stained Glass Basics (Sailboats!)
11 Apr 2025	Ideaworks Member Event: Stained Glass Basics (Sailboats!)
06 Apr 2025	Intro Woodshop (beginners, refresher & safety)
02 Apr 2025	Welding (beginners, refresher & safety)
26 Mar 2025	CNC Carving/Routing Using Inventables X-Carve
26 Mar 2025	Clay Explorations: Handbuilding, Wheel Throwing, and Surface Texturing (all levels)
19 Mar 2025	CNC Carving/Routing Using Inventables X-Carve
19 Mar 2025	Beginning/Refresher Laser Cutting for Ideaworks Members
19 Mar 2025	Beginning Lathe - Pen Turning
15 Mar 2025	Lampwork Glass Art: Pendants
12 Mar 2025	Ideaworks Member Meeting
12 Mar 2025	Canceled PRIVATE Closed class Wednesday 10a-12p Ceramics
09 Mar 2025	Intro Woodshop (beginners, refresher & safety)
05 Mar 2025	Welding (beginners, refresher & safety)
26 Feb 2025	PRIVATE Closed class Wednesday 10a-12p Ceramics
19 Feb 2025	Beginning/Refresher Machine Sewing - evening class
15 Feb 2025	Beginning Lathe - Pen Turning
12 Feb 2025	Machine Shop: Beginning/Refresher
08 Feb 2025	Lampwork Glass Art: Heart Shaped Pendants
05 Feb 2025	Welding (beginners, refresher & safety)
03 Feb 2025	Beginning/Refresher Laser Cutting for Ideaworks Members
01 Feb 2025	Handsewing Techniques: Valentine Special!
01 Feb 2025	Intro Woodshop (beginners, refresher & safety) DATE CHANGE!!
28 Jan 2025	Beginning/Refresher Machine Sewing - morning class
25 Jan 2025	Lampwork Glass Art: Beads (all levels)
15 Jan 2025	Beginning Lathe - Pen Turning
08 Jan 2025	Welding (beginners, refresher & safety) Dec
08 Jan 2025	Beginning/Refresher Laser Cutting for Ideaworks Members
14 Dec 2024	Lampwork Glass Art: Holiday Ornaments (all levels)
11 Dec 2024	PRIVATE Closed class Wednesday 10a-12p Wood Project
04 Dec 2024	Beginning Lathe - Pen Turning
04 Dec 2024	Welding (beginners, refresher & safety) Dec
04 Dec 2024	PRIVATE Closed class Wednesday 10a-12p Drawing
20 Nov 2024	PRIVATE Closed class Wednesday 10a-12p Pen turning
18 Nov 2024	Intro Woodshop (beginners, refresher & safety)
13 Nov 2024	PRIVATE Closed class Wednesday 10a-12p Coat rack shelf
06 Nov 2024	Welding (beginners, refresher & safety) Nov
26 Oct 2024	Lampwork Glass Art: Eyeballs! (all levels)
26 Oct 2024	Jewelry Workshop: Halloween Earrings
23 Oct 2024	PRIVATE Closed class Wednesday 10a-12p Coat rack shelf
21 Oct 2024	Relief Printing 2: Multi-color Lino Printing
16 Oct 2024	Beginning Lathe - Pen Turning
16 Oct 2024	Woodshop Skills, Intermediate (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
16 Oct 2024	PRIVATE Closed class Wednesday 10a-12p Coat rack shelf
12 Oct 2024	Jewelry Workshop: Halloween Earrings
09 Oct 2024	Clay Explorations: Handbuilding, Wheel Throwing, and Surface Texturing (all levels)
08 Oct 2024	Relief Printing 1: Intro to Lino Block Carving
07 Oct 2024	Intro Woodshop (beginners, refresher & safety)
02 Oct 2024	Welding (beginners, refresher & safety) Oct
28 Sep 2024	Lampwork Glass Art: Beads (all levels)
22 Sep 2024	Cyanotyping on Fabric (totebags)
19 Sep 2024	Downtown Fresno Academy Visit to the Makerspace
14 Sep 2024	Member Meeting - curious non-members welcome!
11 Sep 2024	Woodshop Skills, Intermediate (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
05 Sep 2024	Art Hop at Fresno Ideaworks
04 Sep 2024	Welding (beginners, refresher & safety) Sep
28 Aug 2024	Wood Lathe - Pen Turning (all levels)
04 Aug 2024	Intro Woodshop (beginners, refresher & safety)
24 Jul 2024	Beginning Lathe - Pen Turning
20 Jul 2024	Classical Woodcarving Intensive for Beginners
14 Jul 2024	Intro Woodshop (beginners, refresher & safety)
13 Jul 2024	Jewelry Making: Crystal Birthstone Bracelets
10 Jul 2024	Beginning Lathe - Pen Turning
24 Jun 2024	Relief Printing 1: Intro to Lino Block Carving
22 Jun 2024	Jewelry Making: Crystal Birthstone Bracelets
16 Jun 2024	Intro Woodshop (beginners, refresher & safety)
10 Jun 2024	Beginning CNC Routing/Engraving (4'X8' bed)
05 Jun 2024	Beginning Welding (beginners, refresher & safety) Jun
05 Jun 2024	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval) CANCELED!!
25 May 2024	Introduction to Lampwork Glass Art: Sculpted Flowers
15 May 2024	PRIVATE Closed class Wednesday 10a-12p Leather
13 May 2024	Beginning CNC Routing/Engraving (4'X8' bed)CANCELLED!!
10 May 2024	Classical Woodcarving Intensive for Beginners
08 May 2024	Beginning Welding (beginners, refresher & safety) May
07 May 2024	Beginning Lathe - Pen Turning : Mothers Day Special!
01 May 2024	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
27 Apr 2024	Introduction to Lampwork Glass Art: Marbles
15 Apr 2024	Beginning CNC Routing/Engraving (4'X8' bed)
14 Apr 2024	Intro Woodshop (beginners, refresher & safety)
10 Apr 2024	Beginning Welding (beginners, refresher & safety) Apr
23 Mar 2024	Jewelry Making: Crystal Birthstone Bracelets
18 Mar 2024	Beginning CNC Routing/Engraving (4'X8' bed) CANCELLED!!!
16 Mar 2024	Introduction to Lampwork Glass Art: Beads
15 Mar 2024	Ideaworks Member Event: Beginning Laser Engraving/Cutting
13 Mar 2024	Beginning Welding (beginners, refresher & safety) Mar
10 Mar 2024	Intro Woodshop (beginners, refresher & safety)
09 Mar 2024	Meet Your Makers!
09 Mar 2024	Jewelry Making: Crystal Birthstone Bracelets
14 Feb 2024	Beginning Welding (beginners, refresher & safety) Feb
11 Feb 2024	Intro Woodshop (beginners, refresher & safety)
10 Feb 2024	Introduction to Lampwork Glass Art: Pendants
10 Feb 2024	Jewelry Making: Crystal Birthstone Bracelets
07 Feb 2024	Beginning Ceramics
07 Feb 2024	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
06 Feb 2024	Introduction to Microcontrollers: Circuits & Programming
22 Jan 2024	Beginning CNC Routing/Engraving (4'X8' bed)
21 Jan 2024	Intro Woodshop (beginners, refresher & safety) DATE CHANGE!!
20 Jan 2024	Quilt Block Club 2024! (Note date change for October)
18 Jan 2024	CNC Carving/Routing Using Inventables X-Carve
11 Jan 2024	Ideaworks Member Event: Beginning Laser Engraving/Cutting
11 Dec 2023	Beginning CNC Routing/Engraving (4'X8' bed)
03 Dec 2023	Intro Woodshop (beginners, refresher & safety)
29 Nov 2023	Beginning Welding (beginners, refresher & safety)
09 Nov 2023	Introductory 3D Printing and Design
08 Nov 2023	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
06 Nov 2023	Beginning CNC Routing/Engraving (4'X8' bed)
05 Nov 2023	Intro Woodshop (beginners, refresher & safety)
02 Nov 2023	Beginning Machine Shop
01 Nov 2023	Beginning Welding (beginners, refresher & safety)
23 Oct 2023	Beginning CNC Routing/Engraving (4'X8' bed)
11 Oct 2023	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
08 Oct 2023	Intro Woodshop (beginners, refresher & safety)DATE CHANGE
04 Oct 2023	Hand-building Clay Vessels and Intro to Potter's Wheel
04 Oct 2023	Beginning Welding (beginners, refresher & safety)
23 Sep 2023	Art Taster: Easy Cyanotyping on Fabric
13 Sep 2023	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval) CLASS CANCELED!
11 Sep 2023	Beginning CNC Routing/Engraving (4'X8' bed)
10 Sep 2023	Intro Woodshop (beginners, refresher & safety)
06 Sep 2023	Beginning Welding (beginners, refresher & safety)
14 Aug 2023	Beginning CNC Routing/Engraving (4'X8' bed)
13 Aug 2023	Intro Woodshop (beginners, refresher & safety)
09 Aug 2023	Beginning Welding (beginners, refresher & safety)
09 Aug 2023	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
17 Jul 2023	Beginning CNC Routing/Engraving (4'X8' bed)
12 Jul 2023	Ideaworks Member Event: Beginning Laser Engraving/Cutting
09 Jul 2023	Intro Woodshop (beginners, refresher & safety)
05 Jul 2023	Beginning Welding (beginners, refresher & safety)
24 Jun 2023	Introductory 3D Printing and Design
22 Jun 2023	Beginning/Refresher Machine Sewing - morning class
19 Jun 2023	Beginning/Refresher Machine Sewing - evening class
14 Jun 2023	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
11 Jun 2023	Intro Woodshop (beginners, refresher & safety) SCHEDULE CHANGE!
07 Jun 2023	Beginning Welding (beginners, refresher & safety)
22 May 2023	Beginning CNC Routing/Engraving (4'X8' bed)
17 May 2023	***NEW DATES - Beginning Welding (beginners, refresher & safety)
10 May 2023	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
10 May 2023	Hand-building Clay Vessels
07 May 2023	Intro Woodshop (beginners, refresher & safety)
04 May 2023	Beginning Ceramics (5:30 - 7:30 pm)
27 Apr 2023	Beginning/Refresher Machine Sewing - morning class
26 Apr 2023	Beginning Laser Engraving/Cutting
24 Apr 2023	Beginning/Refresher Machine Sewing - evening class
17 Apr 2023	Beginning CNC Routing/Engraving (4'X8' bed)
16 Apr 2023	Intro Woodshop (beginners, refresher & safety) Apr
12 Apr 2023	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
05 Apr 2023	Beginning Welding (beginners, refresher & safety) Apr
14 Mar 2023	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval) DATE CHANGE!!
13 Mar 2023	Beginning CNC Routing/Engraving (4'X8' bed) CANCELED!
08 Mar 2023	Beginning Welding (beginners, refresher & safety) Mar
05 Mar 2023	Intro Woodshop (beginners, refresher & safety) Mar
13 Feb 2023	Beginning CNC Routing/Engraving (4'X8' bed) CANCELED!
12 Feb 2023	Intro Woodshop (beginners, refresher & safety) Feb
08 Feb 2023	Beginning Welding (beginners, refresher & safety) Feb
02 Feb 2023	Beginning Ceramics (5:30 - 7:30 pm)
01 Feb 2023	Beginning Laser Engraving/Cutting
23 Jan 2023	Beginning CNC Routing/Engraving (4'X8' bed)
11 Jan 2023	Beginning Welding (beginners, refresher & safety) Jan
08 Jan 2023	Intro Woodshop (beginners, refresher & safety) Jan
03 Jan 2023	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
12 Dec 2022	Beginning CNC Routing/Engraving (4'X8' bed)
07 Dec 2022	Beginning Welding (beginners, refresher & safety)
06 Dec 2022	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
04 Dec 2022	Intro Woodshop (beginners, refresher & safety)
19 Nov 2022	Introductory 3D Printing and Design
14 Nov 2022	Beginning CNC Routing/Engraving (4'X8' bed) CANCELED
09 Nov 2022	Intermediate Ceramics - Hand-building Clay Vessels
06 Nov 2022	Intro Woodshop (beginners, refresher & safety)
02 Nov 2022	Beginning Welding (beginners, refresher & safety)
01 Nov 2022	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
27 Oct 2022	Beginning Ceramics (7:15 - 8:45 pm)
27 Oct 2022	Beginning Ceramics (5:30 - 7:00 pm)
17 Oct 2022	Beginning CNC Routing/Engraving (4'X8' bed)
16 Oct 2022	Intro Woodshop (beginners, refresher & safety)
05 Oct 2022	Beginning Welding (beginners, refresher & safety)
04 Oct 2022	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
21 Sep 2022	CNC Carving/Routing Using Inventables X-Carve
12 Sep 2022	Beginning CNC Routing/Engraving (4'X8' bed)
11 Sep 2022	Intro Woodshop (beginners, refresher & safety)
07 Sep 2022	Beginning Welding (beginners, refresher & safety)
07 Sep 2022	Beginning Laser Engraving/Cutting
06 Sep 2022	Intermediate Woodshop Skills (Prerequisite: Beginning Woodshop at Ideaworks or Instructor's Approval)
01 Sep 2022	Beginning Ceramics (7:15 - 8:45 pm)
01 Sep 2022	Beginning Ceramics (5:30 - 7 pm)
24 Aug 2022	CNC Carving/Routing Using Inventables X-Carve
22 Aug 2022	Beginning CNC Routing/Engraving (4'X8' bed) CANCELED
16 Aug 2022	Tech Tuesday Public Drop-in
14 Aug 2022	Intro Woodshop (beginners, refresher & safety)
10 Aug 2022	Beginning Welding (beginners, refresher & safety)
13 Jul 2022	Beginning Welding (beginners, refresher & safety)
11 Jul 2022	Beginning CNC
10 Jul 2022	Intro Woodshop (beginners, refresher & safety)
23 Jun 2022	Beginning Ceramics, Extended Class
15 Jun 2022	Beginning Welding (beginners, refresher & safety)
14 Jun 2022	Beginning CNC (Canceled)
05 Jun 2022	Intro Woodshop (beginners, refresher & safety)
21 May 2022	Introductory 3D Printing and Design
17 May 2022	Beginning CNC
11 May 2022	Beginning Laser Engraving/Cutting
05 May 2022	Beginning Ceramics, Extended Class
04 May 2022	Beginning Welding (beginners, refresher & safety)
19 Apr 2022	Beginning CNC
06 Apr 2022	Beginning Welding (beginners, refresher & safety)
03 Apr 2022	Intro Woodshop (beginners, refresher & safety)
02 Apr 2022	Bloom Crew Art Studio Private Event
24 Mar 2022	Beginning Ceramics, Extended Class
15 Mar 2022	Beginning CNC
06 Mar 2022	Intro Woodshop (beginners, refresher & safety)
02 Mar 2022	Beginning Welding (beginners, refresher & safety)
23 Feb 2022	Beginning Laser Engraving/Cutting
15 Feb 2022	Beginning CNC
12 Feb 2022	Ideaworks Member Meeting
07 Feb 2022	Ideaworks Board Meeting
06 Feb 2022	Intro Woodshop (beginners, refresher & safety)
03 Feb 2022	Beginning Ceramics, Extended Class
02 Feb 2022	Beginning Welding (beginners, refresher & safety)
18 Jan 2022	Beginning CNC
17 Jan 2022	Members Event: CNC Carving/Routing Using Inventables X-Carve
12 Jan 2022	January 2022 Member Meeting & Potluck
10 Jan 2022	January 2022 Board Meeting
09 Jan 2022	Intro Woodshop (beginners, refresher & safety)
14 Dec 2021	Beginning CNC
05 Dec 2021	Intro Woodshop (beginners, refresher & safety)
01 Dec 2021	Beginning Welding
16 Nov 2021	Beginning CNC
07 Nov 2021	Intro Woodshop (beginners, refresher & safety)
04 Nov 2021	Beginning Ceramics, Extended Class
03 Nov 2021	Beginning Welding
23 Oct 2021	CoderDojo Fresno@Ideaworks Re-Launch and CoderDojo Birthday Celebration
19 Oct 2021	Beginning CNC
10 Oct 2021	Intro Woodshop (beginners, refresher, & safety)
07 Oct 2021	Makers Market during Art Hop!
06 Oct 2021	Beginning Welding
06 Oct 2021	Beginning Ceramics, Extended Class
02 Oct 2021	Hand Sewing Clinic: Visible Mending - Needle Weaving
21 Sep 2021	Beginning CNC
14 Sep 2021	Ideaworks at the Grizzlies Game!
12 Sep 2021	Intro Woodshop (beginners, refresher, & safety)
08 Sep 2021	Beginning Welding
04 Sep 2021	HEROES FEST-Hawaiian Style! Presented By: Project Wish Upon A Star
02 Sep 2021	Makers Market during Art Hop!
25 Aug 2021	Beginning CNC
15 Aug 2021	Beginning Woodshop
11 Aug 2021	Beginning Welding
14 Jul 2021	Beginning Welding
13 Jul 2021	Beginning CNC
11 Jul 2021	Beginning Woodshop
10 Jul 2021	Introduction to Single Board Computers Using the Raspberry Pi
10 Jul 2021	Introduction to Arduino: Circuits & Programming
23 Jun 2021	Beginning Ceramics, Extended Class
16 Jun 2021	Beginning Welding
15 Jun 2021	Beginning CNC
06 Jun 2021	Beginning Woodshop
19 May 2021	Beginning Welding
23 Feb 2021	(Virtually) Tech Tuesday
16 Feb 2021	(Virtually) Tech Tuesday
10 Feb 2021	Monthly Member Meeting
09 Feb 2021	(Virtually) Tech Tuesday
08 Feb 2021	Monthly Board Meeting
02 Feb 2021	(Virtually) Tech Tuesday
18 Oct 2020	Advanced Microcontrollers: Circuits & Programming (Virtually!)
17 Oct 2020	Intermediate Microcontrollers: Circuits & Programming (Virtually!)
17 Oct 2020	Introduction to Arduino: Circuits & Programming (Virtually!)
11 Oct 2020	Ceramics Online Classroom
29 Aug 2020	Introduction to Arduino: Circuits & Programming (Virtually!)
29 Aug 2020	Advanced Microcontrollers: Circuits & Programming (Virtually!)
18 Jul 2020	Intermediate Microcontrollers: Circuits & Programming (Virtually!)
17 May 2020	Ceramics I Extended Class (520)
07 Apr 2020	Ceramics I Extended Class
05 Apr 2020	Beginning Woodshop
22 Mar 2020	Beginning Glass/Flame Work - Marbles
14 Mar 2020	Ideaworks Pi Day, Raspberry Jam, and STEM Celebration
08 Mar 2020	Beginning Woodshop
04 Mar 2020	Welding I
22 Feb 2020	Pen Turning (Beginning Wood Lathe)
16 Feb 2020	Ceramics I Extended Class
13 Feb 2020	Valentine Date Night Pen Turning
12 Feb 2020	Valentine Date Night Pen Turning
12 Feb 2020	Welding I
10 Feb 2020	Valentine Date Night Pen Turning
08 Feb 2020	Quilt Block Club: Love Notes
02 Feb 2020	Beginning Woodshop
28 Jan 2020	CNC 101
25 Jan 2020	Pen Turning (Beginning Wood Lathe)
18 Jan 2020	3D Printing and Design
11 Jan 2020	Introduction to Arduino: Circuits & Programming
11 Jan 2020	Quilt Block Club: Snow Storm
05 Jan 2020	Ceramics I Extended Class
05 Jan 2020	Beginning Woodshop
14 Dec 2019	Quilt Block Club: Winter Star
08 Dec 2019	Pen Turning 1
01 Dec 2019	Woodshop I
25 Nov 2019	Floral Design: Thanksgiving Tablescapes
23 Nov 2019	Quilt Block Club: Traditional Maple Leaf
10 Nov 2019	Ceramics I
09 Nov 2019	Quilt Block Club: Wonky Log Cabin
06 Nov 2019	Welding I
06 Nov 2019	Ceramics I Extended Class
06 Nov 2019	Machine Shop I
03 Nov 2019	Woodshop I
02 Nov 2019	Pen Turning 1
30 Oct 2019	Wooly Wednesdays
29 Oct 2019	Machine Sewing I - evening
23 Oct 2019	Wooly Wednesdays
16 Oct 2019	Wooly Wednesdays
15 Oct 2019	CNC 101
14 Oct 2019	Candy Cane Reindeer
12 Oct 2019	Quilt Block Club: Halloween Cat
06 Oct 2019	Woodshop I
02 Oct 2019	Wooly Wednesdays
02 Oct 2019	Welding I
14 Sep 2019	CoderDojo Fresno@Ideaworks
11 Sep 2019	Member Meeting
11 Sep 2019	Ceramics I Extended Class
08 Sep 2019	Woodshop I
04 Sep 2019	Welding I
28 Aug 2019	Machine Shop I
17 Aug 2019	Pen Turning 1
14 Aug 2019	Member Meeting
11 Aug 2019	Woodshop I
10 Aug 2019	CoderDojo Fresno@Ideaworks
07 Aug 2019	Welding I
07 Aug 2019	Ceramics I
23 Jul 2019	Ceramics: Basic Hand Building
18 Jul 2019	Beginning Machine Sewing I - morning
17 Jul 2019	Welding 101
17 Jul 2019	Machine Shop I
15 Jul 2019	CNC 101
10 Jul 2019	Beginning Ceramics I
09 Jul 2019	Introduction to LEGO Robotics
18 Jun 2019	Beginning Machine Sewing I
12 Jun 2019	Machine Shop 101
04 Jun 2019	Ideaworks Ceramics Wheel Throwing Workshop
02 Jun 2019	Beginning Ceramics II
02 Jun 2019	Ideaworks Beginning Wood Shop - June 2019
01 Jun 2019	Beginner Pen Making
22 May 2019	Fleece to Yarn
20 May 2019	IDEAWORKS CNC 101
15 May 2019	Welding 101: for Beginners - May Wednesdays
12 May 2019	Ideaworks Beginning Wood Shop - May 2019
11 May 2019	Introduction to Wood Stabilizing
09 May 2019	Beginning Machine Sewing I
07 May 2019	Ideaworks Ceramics Wheel Throwing Workshop
05 May 2019	Ideaworks Ceramics INTERMEDIATE Wheel Throwing Workshop
24 Apr 2019	Ideaworks Ceramics Slip Casting Workshop
17 Apr 2019	Welding 101
10 Apr 2019	Machine Shop 101
07 Apr 2019	Ideaworks Ceramics INTERMEDIATE Wheel Throwing Workshop
03 Apr 2019	Ideaworks Ceramics Wheel Throwing Workshop
03 Apr 2019	Ideaworks Ceramics Slip Casting Workshop
19 Mar 2019	Ideaworks Ceramics Slip Casting Workshop
13 Mar 2019	Welding 101: for Beginners - March Wednesdays
10 Mar 2019	Arty Party: Accordion Books
10 Mar 2019	Ideaworks Beginning Woodshop - March 2019
06 Mar 2019	Machine Shop 101
05 Mar 2019	Ideaworks Ceramics Wheel Throwing Workshop
05 Mar 2019	Ideaworks Ceramics Slip Casting Workshop
02 Mar 2019	Fresno Ideaworks Raspberry Jam and Pi Day Celebrations
28 Feb 2019	(Make up Day) Beer Appreciation: Introduction to Beer Making - February
21 Feb 2019	Beer Appreciation: Introduction to Beer Making - February
19 Feb 2019	Ideaworks Ceramics Slip Casting Workshop
13 Feb 2019	Welding 101: for Beginners - February Wednesdays
10 Feb 2019	Arty Party: Poetry Charms
10 Feb 2019	Ideaworks Beginning Woodshop - February 2019
09 Feb 2019	Crazy Hearts in Polymer Clay
06 Feb 2019	Machine Shop 101
05 Feb 2019	Ideaworks Ceramics Wheel Throwing Workshop
05 Feb 2019	Ideaworks Ceramics Slip Casting Workshop
15 Jan 2019	Ideaworks Ceramics Wheel Throwing Workshop
15 Jan 2019	Ideaworks Ceramics Slip Casting Workshop
13 Jan 2019	Ideaworks Beginning Woodshop - January 2019
11 Jan 2019	Welding 101: for Beginners - January Fridays
10 Jan 2019	Beer Appreciation: Introduction to Beer Making - January
09 Jan 2019	Welding 101: for Beginners - January Wednesdays
09 Jan 2019	Machine Shop 101
11 Dec 2018	Tech Tuesday: Christmas Tree Lane LED Walk.
09 Dec 2018	Arty Party in the Textile Shop - Session 2: Collage and Mixed Media
02 Dec 2018	Arty Party in the Textile Shop - Session 1: Polymer Clay Snowman
02 Dec 2018	Ideaworks Beginning Woodshop - December
14 Nov 2018	Welding 101: for Beginners - November
05 Nov 2018	Beer Appreciation: Introduction to Beer Making - November
04 Nov 2018	Ideaworks Beginning Woodshop - November
13 Oct 2018	Shop Inventory Sale
07 Oct 2018	Last day to remove personal property from the Shop!
06 Oct 2018	1730 H. Street Work Days
02 Oct 2018	Tech Tuesday: electronics and coding focus group
19 Sep 2018	Wooly Wednesdays: Fiber Arts Focus
12 Sep 2018	Welding 101: for Beginners - September
09 Sep 2018	Ideaworks Beginning Woodshop - September
17 Aug 2018	Welding 101: for Beginners - August (Fridays)
15 Aug 2018	Welding 101: for Beginners - August
12 Aug 2018	Ideaworks Beginning Woodshop - August
03 Aug 2018	Fox 26 "GreatDay" at Ideaworks!
20 Jul 2018	Ideaworks Mini-Golf at Taco Truck Throwdown 2018
20 Jul 2018	Volunteer Opportunity: Set-up of Ideaworks Mini-Golf at Taco Truck Throwdown 2018
17 Jul 2018	Tech Tuesday: Microelectronics and Tech Roundtable
15 Jul 2018	Sawdust Sundays
15 Jul 2018	Ideaworks Beginning Woodshop - July
13 Jul 2018	Welding 101: for Beginners - July
11 Jul 2018	Ideaworks Makerspaces Member Meeting
11 Jul 2018	Welding 101: for Beginners - July
10 Jul 2018	Ideaworks Ceramics Workshop - Tuesdays 8PM-10PM
10 Jul 2018	Ideaworks Ceramics Workshop - Tuesdays 5:30PM-7:30PM
10 Jun 2018	Ideaworks Beginning Woodshop - June
06 Jun 2018	Welding 101: for Beginners - June
05 Jun 2018	Ideaworks Ceramics Workshop - Tuesdays 8PM-10PM
05 Jun 2018	Ideaworks Ceramics Workshop - Tuesdays 5:30PM-7:30PM
08 May 2018	Ideaworks Ceramics Workshop - Tuesdays 8PM-10PM
08 May 2018	Ideaworks Ceramics Workshop - Tuesdays 5:30PM-7:30PM
06 May 2018	Beginner Lampwork - Making a Marble
06 May 2018	Beginner Lampwork - Mushroom Pendant
05 May 2018	Beginner Lampwork - Making a Marble
05 May 2018	Beginner Lampwork - Making a Marble
02 May 2018	Welding 101: for Beginners - May
18 Apr 2018	3D Creations: Printing and Finishing - April
08 Apr 2018	Ideaworks Beginning Woodshop - April
04 Apr 2018	Welding 101: for Beginners - April
03 Apr 2018	Ideaworks Ceramics Workshop - Tuesdays 8PM-10PM
03 Apr 2018	Ideaworks Ceramics Workshop - Tuesdays 5:30PM-7:30PM
31 Mar 2018	Beginner Lampwork - Making a Marble
31 Mar 2018	Beginner Lampwork - Mushroom Pendant
28 Mar 2018	3D Creations: Modeling for 3D Printing - April
27 Mar 2018	Beginner Lampwork - Making a Marble
27 Mar 2018	Beginner Lampwork - Making a Marble
25 Mar 2018	Beginner Lampwork - Making a Marble
25 Mar 2018	Beginner Lampwork - Making a Marble
14 Mar 2018	Pi Day 2018
07 Mar 2018	Welding 101: for Beginners - March
06 Mar 2018	Ideaworks Ceramics Workshop - Tuesdays 8PM-10PM
06 Mar 2018	Ideaworks Ceramics Workshop - Tuesdays 5:30PM-7:30PM
04 Mar 2018	Ideaworks Beginning Woodshop - March
11 Feb 2018	Ideaworks Beginning Woodshop - February
07 Feb 2018	Welding 101: for Beginners - February
06 Feb 2018	Ideaworks Ceramics Workshop - Tuesdays 8PM-10PM
06 Feb 2018	Ideaworks Ceramics Workshop - Tuesdays 5:30PM-7:30PM
02 Feb 2018	Welding 101: CTEC Teachers Only
26 Jan 2018	Intermediate MIG Welding - January
21 Jan 2018	Beginner Lampwork - Mushroom Pendant
20 Jan 2018	Beginner Lampwork - Mushroom Pendant
14 Jan 2018	Beginner Lampwork - Mushroom Pendant
14 Jan 2018	Ideaworks Beginning Woodshop - January
13 Jan 2018	Beginner Lampwork - Mushroom Pendant
13 Jan 2018	Beginner Lampwork - Mushroom Pendant
07 Jan 2018	Beginner Lampwork - Mushroom Pendant
06 Jan 2018	Beginner Lampwork - Mushroom Pendant
06 Jan 2018	Beginner Lampwork - Mushroom Pendant
03 Jan 2018	Welding 101: for Beginners - January
16 Dec 2017	Ideaworks Pen/Pencil Slim Style Turning Class - December
06 Dec 2017	Welding 101: for Beginners - December
03 Dec 2017	Ideaworks Beginning Woodshop - December
17 Nov 2017	MMAW Learn How to Stick Weld - November
10 Nov 2017	Basic TIG Welding - November
07 Nov 2017	Ideaworks Ceramics Workshop - Tuesdays 8PM-10PM
07 Nov 2017	Ideaworks Ceramics Workshop - Tuesdays 5:30PM-7:30PM
05 Nov 2017	Ideaworks Beginning Woodshop - November
03 Nov 2017	Learn to Weld with Flux Core Wire - November
01 Nov 2017	Welding 101: for Beginners - November
27 Oct 2017	Intermediate MIG Welding - October
20 Oct 2017	MMAW Learn How to Stick Weld - October
20 Oct 2017	Cosplay 101: Foamsmithing - Cycle B
15 Oct 2017	Reclaimed Wood Pallet BAR.
13 Oct 2017	Basic TIG Welding - October
13 Oct 2017	Cosplay 101: Foamsmithing - Cycle A
06 Oct 2017	Learn to Weld with Flux Core Wire - October
29 Sep 2017	Intermediate MIG Welding
22 Sep 2017	MMAW Learn How to Stick Weld
15 Sep 2017	Basic TIG Welding
08 Sep 2017	Learn to Weld with Flux Core Wire
06 Sep 2017	Welding 101 - for Beginners
29 Aug 2017	Tech Tuesday
25 Aug 2017	MMAW Learn How to Stick Weld
23 Aug 2017	Beginning MIG2 Welding: Cube/Dice Project
18 Aug 2017	Beginning MIG1 Welding: Art Sculpture Project
06 Aug 2017	Ideaworks Beginning Woodshop
04 Aug 2017	Learn to Weld with Flux Core Wire
02 Aug 2017	Basic TIG Welding
14 Jul 2017	MMAW Learn How to Stick Weld
09 Jul 2017	Ideaworks Beginning Woodshop
04 Jun 2017	Ideaworks Beginning Woodshop
19 May 2017	MMAW Learn How to Stick Weld
21 Apr 2017	MMAW Learn How to Stick Weld
18 Apr 2017	Basic Laser Cutter Operations (April 18th)
11 Apr 2017	Basic Laser Cutter Operations (April 11th)
09 Apr 2017	Fresno Mini Maker Faire
08 Apr 2017	Glass Blowing Workshop - Blown Glass Easter Eggs (3PM - 4PM)
08 Apr 2017	Glass Blowing Workshop - Blown Glass Easter Eggs (2PM - 3PM)
08 Apr 2017	Glass Blowing Workshop - Blown Glass Easter Eggs (1PM - 2PM)
08 Apr 2017	Glass Blowing Workshop - Blown Glass Easter Eggs (12PM - 1PM)
08 Apr 2017	Glass Blowing Workshop - Blown Glass Easter Eggs (11AM - 12PM)
08 Apr 2017	Glass Blowing Workshop - Blown Glass Easter Eggs
08 Apr 2017	Glass Blowing Workshop - Blown Glass Easter Eggs (10AM - 11AM)
04 Apr 2017	Basic Laser Cutter Operations (April 4th)
01 Apr 2017	Mosaic Stained Glass Windows
31 Mar 2017	More Than Robots: A Fundraiser for Robotics in Central California
28 Mar 2017	Basic Laser Cutter Operations (March 28th)
27 Mar 2017	TIG1 Beginner Workshop for TIG Welding
24 Mar 2017	Oxy Acetylene Basics
20 Mar 2017	Beginning MIG3 Welding Basics: Project TRIVIT Displaying Welds
17 Mar 2017	FCAW1 Learn Flux Core Wire Welding Basics
13 Mar 2017	Beginning MIG1 Welding: Art Sculpture Project
10 Mar 2017	Beginning MIG2 Welding: Cube/Dice Project
01 Mar 2017	Wooly Wednesdays
26 Feb 2017	Sawdust Sundays

Home	About Fresno Ideaworks
Membership	History
Calendar	Community
Store & Services	Facility
Contribute	Policies & Procedures

Address:

Fresno Ideaworks

1730 H Street

Fresno, CA, 93721

Phone:

559-833-IDEA (4332)

Email:

info@fresnoideaworks.org

Fresno Ideaworks is a 501(c)3 non-profit organization.

Full Ideaworks Calendar

Upcoming events

FREE MONTH OF MEMBERSHIP - New members only

Free Month of Membership For First-time students

Free Month of Membership For First-time students

FREE MONTH OF MEMBERSHIP - New members only

FREE MONTH OF MEMBERSHIP - New members only

FREE MONTH OF MEMBERSHIP - New members only

FREE MONTH OF MEMBERSHIP - New members only

Free Month of Membership For First-time students

FREE MONTH OF MEMBERSHIP - New members only

FREE MONTH OF MEMBERSHIP - New members only

Free Month of Membership For First-time students

FREE MONTH OF MEMBERSHIP - New members only

Free Month of Membership For First-time students

FREE MONTH OF MEMBERSHIP - New members only

FREE MONTH OF MEMBERSHIP - New members only

Free Month of Membership For First-time students

FREE MONTH OF MEMBERSHIP - New members only

FREE MONTH OF MEMBERSHIP - New members only

Past events